Green Led
Green Led
 |
US $7.57
8 technical ideas to make sure the quality of the led display
if you want produce a good quality Led display you need make sure some technology controller like below.
1.Led display facotry should have good measures ,Dedicated l anti-static electronic floor , anti-static ,soldering iron,anti-static ,anti-static table pad ,anti-staic cloth, Humidity control ,equipment connect to the floor etc .
2.LED display module driving circuit design of the drive circuit board arrangement of driver IC for LED brightness will also be affected. As the driver IC output current in the PCB board transmission distance too far, will make the transmission path of the pressure drop is too large, affecting the normal LED operating voltage leads to decrease in brightness. We often find that the module LED display LED brightness around the middle lower than that for this reason. Therefore, the display brightness to ensure consistency, we must design a good drive circuit distribution.
3.The normal LED current value of the design current is 20mA, the maximum using of current general recommendation does not more than 80% of normal value, in particular, the distance between the small screen, due to poor heat dissipation will also reduce the current value. Follow the Experience,Hydraulic Fittings as red, green, blue LED decay rate of the inconsistency, targeted reduction in blue, green LED's current value, in order to maintain display consistency of the white balance after prolonged use
4.Mixed light with a color different brightness profile of the LED lights require mixing, or the law designed to plug in discrete light graph insert lights, to ensure that the entire screen brightness of each color consistency. In this process, if a problem occurs, there will be displays of local brightness inconsistency, directly affect the LED screen display.
5.control verticality of the-line LED for a sufficient time had furnace technology to ensure perpendicular to the PCB board of LED. Any deviation will affect the already set a good LED brightness uniformity, color block appears inconsistent brightness. .
6.wave soldering temperature and time had to be strict control of temperature and wave front through furnace welding time, recommended as follows: preheating temperature of 100 ℃ ± 5 ℃, the maximum does not exceed 120 ℃, and the preheating temperature rise for a smooth, welding temperature to 245 ℃ ± 5 ℃, welding time recommended no more than 3 seconds after furnace avoid excessive vibration or shock LED, until the restoration of normal temperature. Wave soldering machine parameters to periodically test the temperature, which is determined by the characteristics of LED, overheating, or fluctuations in temperature will cause direct damage LED or LED quality risks, especially for small size, such as circular and oval-shaped 3mm LED.
7.Weld control LED display LED is not lit in the event, they often have more than 50% probability caused by various types of Weld, such Centrifugal Fan as the LED pin Weld, IC pin Weld, mother of Weld pin row and so on. These issues need to strictly improve the process to improve and strengthen the quality inspection to resolve. Vibration test before leaving the factory also be a good test method.
8.LED thermal design work may have a fever, high temperature will affect the decay rate and the stability of the LED, so the heat PCB board design, thermal design of the ventilation box will affect the performance of LED
About the Author
Coach Bags is The TOP 1 Coach Bags store,we sell Compression Tube Fittings,you can buy Safe Solenoid Valve from us
|
|
3V Green LED $2.3 3V Green LED Joint Compounds |
|
|
Green 3in Led Strip $16.99 STREETGLOW SGLST3GR 3" LED STRIP (GREEN) |
|
|
Green Led Strobe Light $23.99 STREETGLOW ANLEDSLGR LED STROBE LIGHT (GREEN) |
|
|
Green 12in Led Strip $27.99 STREETGLOW SGLST12GR 12" LED STRIP (GREEN) |
|
|
Green 9in Led Strip $22.99 STREETGLOW SGLST9GR 9" LED STRIP (GREEN) |
|
|
Energizer LED - AAA - Green HD33A2ODE $19.83 Energizer LED - AAA - Green HD33A2ODE |
|
|
Energizer LED - AA - Green ECAP1AAE $28.03 Energizer LED - AA - Green ECAP1AAE |
|
|
Energizer LED - AA - Green EHH2AA3CE $25.43 Energizer LED - AA - Green EHH2AA3CE |
|
|
Energizer LED - AAA - Green HD33A3CE $31.56 Energizer LED - AAA - Green HD33A3CE |
|
|
LOGISYS Computer MDLED1GN GREEN LAZER LED Light $5.99 Specifications: Color: Green Type: LED |
|
|
STANDARD GREEN LED $3.99 Standard green LED. 20 MCD. T#: 1-3/4, 5mm. Green diffused lens. View angle: 30, 2.2V. 2 per pack. |
|
|
Sony / SINGLE ALARM INCH GREEN LED / 8424478WHITE $27.8 Sony - SINGLE ALARM INCH GREEN LED - 8424478WHITE |
|
|
Fretlord FretLightZ Fretboard Illuminator LED Light Green $9.99 Fretlord FretLightZ Fretboard Illuminator LED Light Green |
|
|
Fretlord Fretlightz Fretboard Illuminator Led Light Green $9.99 Fretlord FretLightZ Fretboard Illuminator LED Light Green |
|
|
Antec Tricool 80mm Green LED Case Fan $11.94 Antec Tricool 80mm Green LED Case Fan |
|
|
SureFire, LLC LED - AA - AluminumBody - Green RG104A $28.3 SureFire, LLC LED - AA - AluminumBody - Green RG104A |
|
|
SureFire, LLC LED - AA - AluminumBody - Green RG204A $34.3 SureFire, LLC LED - AA - AluminumBody - Green RG204A |
|
|
12mm 1.8V~3V Green LED Emitters (20-Pack) $3 12mm 1.8V~3V Green LED Emitters (20-Pack) |
|
|
20mm 5V 10000~12000mcd LED Emitter (Green) $2.6 20mm 5V 10000~12000mcd LED Emitter (Green) |
|
|
8mm 1.8V~3V LED Emitter Green (20-Pack) $2.2 8mm 1.8V~3V LED Emitter Green (20-Pack) |
|
|
4600ghd051ce Imgr/Rs-232/Usb Kbw/Ibm4683/Gray/Green Led $287.99 4600GHD051CE IMGR/RS-232/USB KBW/IBM4683/GRAY/GREEN LED |
|
|
Led Puck Light Green Each $4.99 The Green LED Puck Light will enhance any ice luge when used in the evening or in a dark venue. Simply slide the green LED light beneath any ice luge (each ice luge has a cavity in its base) for a spectacular show of color. Each of the 3 inch high x 3 inch wide x 1 inch deep Green LED Puck Lights is reusable and water proof. The Green LED Puck Light requires three AAA batteries; not included. |
|
|
Aquascape 98372 LED Replacement Bulb Green $22.87 Replaceable diodes for Aquascape LED Bullet Spotlights and LED Waterfall Lights. Standard 1Watt. High output LED diode. Color: Green. |
|
|
LiteGlow Underbody Light Kits - L.E.D. (Green) [Universal - Fits all Vehicles] $158.93 LiteGlow Underbody Light Kits - L.E.D. (Green) |
|
|
Green LED Spot Light Bulb $9.99 Cast a ghostly hue when you uplight your favorite Halloween decorations with this energy efficient and long-lasting green LED spot |
|
|
Green LED Battery Operated Strobe Light $7.99 Create a green and ghostly Halloween atmosphere with this amazing adjustable green LED Strobe Light - you speed up or slow down the strobe and the super bright LED lights just keep on flashing to the |
|
|
Green 30 LED Lights $5 Features: Comes with adhesive tape on the back for easy attachment Flexible enough to be bent at any angle Each segment comes with 3 LED lights.? It is easy to shorten or extend the strips to different length. Specifications: LED Quantity: 30 pcs Standard length: 0.5 meter Strip width: 5mm Working voltage: DC12V Wire length(1mtr): 10cm |
|
|
Green, 240 LED Lights $24 Features: Comes with adhesive tape on the back for easy attachment Flexible enough to be bent at any angle Each segment comes with 3 LED lights.? It is easy to shorten or extend the strips to different length. Specifications: LED Quantity: 240 pcs Standard length: 4 meter Strip width: 5mm Working voltage: DC12V Wire length(1mtr): 10cm |
|
|
Green 12 LED Lights $2.9 Features: Comes with adhesive tape on the back for easy attachment Flexible enough to be bent at any angle Each segment comes with 3 LED lights.? It is easy to shorten or extend the strips to different length. Specifications: LED Quantity: 12 pcs Standard length: 0.2 meter Strip width: 5mm Working voltage: DC12V Wire length(1mtr): 10cm |
|
|
Green 60 LED Lights $6 Features: Comes with adhesive tape on the back for easy attachment Flexible enough to be bent at any angle Each segment comes with 3 LED lights.? It is easy to shorten or extend the strips to different length. Specifications: LED Quantity: 60 pcs Standard length: 1 meter Strip width: 5mm Working voltage: DC12V Wire length(1mtr): 10cm |
|
|
LED Sign, Cafe Sign, Green $208 Draw potential customers� attention to your establishment with this highly visible, Arter Neon Signs 20155 LED Cafe Sign in green. Expected to last at least 100,000 hours this Arter Neon Signs 20155 LED Cafe Sign does not contain toxic mercury or argon and remains cool to touch. Lightweight and easy to mount the Arter Neon Signs 20155 LED Cafe Sign is the perfect widow or wall advertisement to entice people to choose your business. |
|
|
Nexxtech Green LED Alarm Clock $19.99 This Nexxtech alarm clock has a green LED display with large, easy to read 0.8" digits. Operated by AC power, this alarm clock comes with 9V battery backup (battery not included) in case of power failures. The Nexxtech Green LED Alarm Clock has a single alarm function with 9 minute snooze and a PM and Alarm On indicator. 12 hour format only. UPC: 741235160120 Manufacturer's Part Number: M460 |
|
|
Green Mini Cubic LED Flashlight with Keychain $5.99 Description:Find the correct key in the dark by this Keychains LED FlashlightPocket design with Green Mini Cubic LED Flashlight with KeychainsPortable size is easy to carry with your keychainsPress a button in the back will open the LED flashlightColor: Green Size: 2.8*2.2*1.5cmWeight:15g |
|
|
Solar LED Mult-Functional Reading Solar Light - Green $25.99 Solar LED Mult-Functional Reading Solar Light - Green |
|
|
Icon / ICON Rogue 1 Aluminum L.E.D. Flashlight 1-AA - Green / RG104A $43.42 Icon - ICON Rogue 1 Aluminum L.E.D. Flashlight 1-AA - Green - RG104A |
|
|
Icon / ICON Rogue 2 Aluminum L.E.D. Flashlight 1-AA - Green / RG204A $52.29 Icon - ICON Rogue 2 Aluminum L.E.D. Flashlight 1-AA - Green - RG204A |