Marco SRS Air Bag Suspension

Clamp Atv

Air Filter Maintainace

First, what is an air filter? Air filter is defined as a device that reduces the concentration of solid particles in an airstream to a level that can be tolerated in a process or space occupancy; a component of most systems in which air is used for industrial processes, ventilation, or comfort air conditioning.

It is a must to clean and replace the air filter occasionally for the safety and efficiency of the engines performance. Ideally, replacing the air filter should be done every time you change your engine oil, but as manual per say, air filter must be replace every 5,000kms.

Air filters are usually made of paper materials, like OEM and other brands; but other aftermarket air filters are made of cotton which is reusable and washable. The price of OEM air filter are very cheap, but aftermarket brands are quite expensive because they are reusable and claims to add more horse power.

There are many kinds of air filter system, but the most common and proven dyno test to add more horse power is setup called "cold air system". Cold air system is a combination of aftermarket air filters that are connected to intake tubes or power flow tubes which is installed or located on cooler area of the vehicle.

On the other hand you can also install an aftermarket filter that has the same size of the OEM filter size, they are called drop in filters. Drop in filters are made of cotton materials that can filter 5 times compared to conventional air filters. Other tuners prefer this set up because it is much cheaper and easier to install compared to cold air system plus no modification is needed. In fact, you can still use your stock air filter box.

It is very easy to change the air filter; here are some steps on how to do it.

1. Open the hood and find the air-filter housing. It's either a square on fuel-injected engines or round on older carbureted engines.
2. With a use of a Phillips screwdriver, remove the screws or clamps that hold on the top of the housing.
3. Remove the old air filter and clean any dirt and debris from the housing with a clean rag.
4. Install the new air filter.
5. Reassemble the air filter box.
6. Make sure that it's sealed and there is no air leak.
7. You can now start your engine.

 

We hope that this article will help you on how to maintain and clean your air filter.

 

Article from:

http://4wheelonline.com/atv

 

http://4wheels-atv.blogspot.com/

UTV accessories

ATV Blog

About the Author

Article from

http://4wheelonline.com/atv

http://4wheels-atv.blogspot.com/

ODI ATV Grips $28.96 Troy Lee Designs ODI ATV Grips ODI enlisted the help of Troy Lee Designs to help put an artistic spin on a quality new design. After hundreds of drawings and designs, we have developed the most innovative grip yet: The ODI/TLD Lock-on ATV grip. Quality and Innovation that can only be found by combining two world leaders. Features: Grooved channels prevent mud and water buildup Overmolded flap gives added protection on outside clamp Unique undercut pads provide slip comfortable feel with maximum grip Custom flanged design provides hand support with more usable grip surface Laser etched reference marks on inside clamp simplify grip positioning on handlebar Laser etched Troy Lee Designs logos on outside clamps

Carbon Steel ATV Handlebar $17.99 The FOUR Carbon Steel Handlebar features high and low bends with a special knurling on the triple clamp area to help prevent slippage Complete with end caps and crossbar pads

7/8 ATV Handlebars $59.99 Renthal 7/8" ATV Handlebars Renthal 7/8 handlebars re-wrote history when they became the first aftermarket aluminium handlebar to be fitted as OEM on a Japanese motorcycle. All Honda CR/CRF and Kawasaki KX/KXF models (except minis) are fitted with a Renthal 7/8" handle bar as original equipment. The exclusive aluminium alloy and the advanced manufacturing processes we use result in a handlebar which is more than capable of withstanding the extreme rigours of motocross and supercross riding and racing. Features: 7/8" (22mm) external diameter to fit most standard sized clamps and controls 7010 T6 Aluminium, which Renthal has exclusive rights to this specially developed alloy, for the manufacture of handlebars High impact strength, lightweight and excellent vibration dampening Shot peened surface finish to help prevent fatigue failure Knurling - Grip end only - increases bonding between bar and grip No knurling in clamp area, this could cause a stress riser and lead to fatigue failure Anodising - a 15 step anodising process forms an integral coating giving protection against corrosion Renthal’s copyrighted, bonded lightweight single bolt clamping system for the cross-brace* , greatly increases strength whilst still allowing flex Laser etched positioning grid The highest quality - 35 individual steps/processes required in the production of each bar and 58 separate quality checks made A specially developed injection moulded crossbar pad is included with every handlebar

Pro Taper Contour Handlebar - ATV Mid Bend $63.74 . Pro Taper Contour Handlebar - ATV Mid Bend The Contour handlebar is second to none when it comes to strength and function. Pro Taper was the first to introduce the 1 1/8in. taperwall handlebar and has owned the market ever since. The Contour bar is an affordable way to get your hands on the most saught after handlebar design. Measurements (ATV Mid Bend): (See the Additional Images for a measurement diagram) A (Width) 813mm B (Height) 108mm C (Rise) 70mm D (Clamp Area) 236mm E (Sweep) 56mm

Ultra Clamp $22.99 ULTRA CLAMP

C-Clamp $5.99 C-CLAMP

Axe Clamp $22.99 Axe Clamp; Rear;

Clamp $13.6 No Synopsis Available

Trans-Dapt Distributor Clamp $5.99 Distributor Clamp

Tube Clamp $59.99 Tube Clamp; 1.75 in.; Machined; Pair;

Beam Clamp - cable organizer clamp $29.99 Black Box Beam Clamp - Cable organizer clamp (pack of 25 )

Indians ATV $5.53 Indians ATV Comes with Removable Rider

Mets ATV $5.53 Mets ATV Comes with Removable Rider

American DJ Pro-Clamp Truss Clamp $15.46 American DJ Pro-Clamp Truss Clamp

American Dj Pro-Clamp Truss Clamp $16.99 American DJ Pro-Clamp Truss Clamp

Mounting Bracket And Clamp $9.99 Mounting Bracket And Clamp; For Round Connectors; Short Clamp;

Action Pak - Aluminum Clamp $1.5 Action Pak - Aluminum Clamp

Aluminum Cue Clamp $1.5 Aluminum Cue Clamp

Porper Tip Clamp $17.95 Porper Tip Clamp

ATV Light $16.99 ATV Light Bulb. Replacement Part For Part # [WAR62018 and WAR62017

Main blade clamp set $4.55 Main blade clamp set

Tail blade clamp set $3.48 Tail blade clamp set

tail blade clamp $4 tail blade clamp

Vater Drink Holder with Clamp $14.49 Vater Drink Holder with Clamp

K&M Table Clamp $15.99 K&M Table Clamp

Chauvet CLP-09 Lighting Clamp $4.99 Chauvet CLP-09 Lighting Clamp

DW Rack Clamp 1.5 $34.99 DW Rack Clamp 1.5"

Gibraltar Angle Leg Clamp $12.99 Gibraltar Angle Leg Clamp